CA: Engine Performance (see also forced induction & remapping sections)

Product Code: tece9m3ecp

Click to Enlarge

-The 4th ENVY Intake System is the ENVY intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final and most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X ///M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.

Tecnocraft introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X ///M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 ///M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your ///M engine bay over time.

With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECNOCRAFT E9X ///M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket

*(PLEASE LOOK AT PRICE LIST FOR OPTIONS)*

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: tece92m3eim

Click to Enlarge

Breathe more power into your ///M3 by outfitting it's OEM BMW Factory Plenum with the TECNOCRAFT E9X ///M3 ENVY Intake Manifold (Cover Replacement). By enlarging the available volume after the throttle body, the driver gains immediate throttle response, gains of torque and horsepower. Along with the increased volume, the ENVY Intake Manifold also eliminates unnecessary turbulence areas immediately surrounding the factory air horns. In combination with the full ENVY Intake System, the ENVY equipped Intake Manifold resonates an intoxicating V8 growl under the hood*. Its BMW-esque design also enhances its presence as an ENVY system engine bay centerpiece.

*To fully experience the increased advantages in an ENVY-equipped Intake Manifold, ECU tuning and/or engine work is suggested, but not necessary.

Featuring:
-100% Dry Carbon Fiber Construction, Made in the USA.
-HMR, Honeycomb Matrix Reinforced center area for extra strength and rigidity.
-100% CNC Machined Strength Rods (included and installed into every complete ENVY core)
-100% QC and Extreme Aircraft Grade Epoxy Fusion
-Core-exchange program (recommended).
-Installs into factory OEM BMW part location

*(PLEASE LOOK AT PRICE LIST FOR OPTIONS)*

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: tece92m3eis

Click to Enlarge

TECNOCRAFT introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X ///M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 ///M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your ///M engine bay over time.

TECHNICAL SPECIFICATIONS

The complete ENVY™ Intake System gains horsepower and increases throttle response on both the dynamometer and real world use, as expected in all functional ram air intake systems – forward motion at over 60mph brings the performance of the ENVY™ to life.

Dynamometer: 8-11RWHP
Real world use: 13-17RWHP

TECNOCRAFT E9X ///M3 ENVY™ Intake System includes the following (in order of primary airflow):

ENVY™ RAM Air Scoop
-Stage 1 of the ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X ///M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the ///M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X ///M3s are now readily available.

ENVY™ Transition Chamber
-Stage 2 of the ENVY™ intake system is a direct drop-in replacement of the plastic transition pipe on E9X ///M3s. The main advantages of the ENVY™ Transition Chamber is the smooth delivery of intake charge from the RAM Air Scoop by its elimination of unnecessary notches and choked design points leading into the factory ///M3 airbox. Forced air makes its first contact with an organically designed transition chamber, which allows airflow from the ENVY™ Ram Air scoops to be naturally reservoired and transitioned smoothly from left to right. All unnecessary turbulence was eliminated in the ENVY™ Transition Chamber’s design and conforms to extremely tight tolerances to provide a dramatic volume increase to charged air.

ENVY™ Enlarged Intake Cover
-Stage 3 of the ENVY™ intake system is a direct replacement of the factory airbox cover on E9X ///M3s. While we consider the factory intake box design made available by BMW to be sufficient, another necessary step in a complete ENVY™ intake system was development of an Enlarged Intake Cover without the many unnecessary points of intake turbulence while also increasing total airbox volume by 30%. Our Enlarged Intake Cover design carries charged air in greater volume from the Transition Chamber up and over the factory or BMC filter (optional) smoothly, hindering disruption from air filter structure as much as possible before reaching the ENVY™ ChargePipe. Factory fitment in a 100% Dry Carbon product was necessary to ensure hood scoop function remains available to the entire airbox as well.

ENVY™ ChargePipe
-The 4th and Final Stage of the ENVY™ Intake System is the ENVY™ intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final and most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X ///M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.

BMC E9X ///M3 Performance Intake Filter for the Envy™ Intake System
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

MORE INFORMATION ABOUT TECNOCRAFT AND THE E9X ///M3 ENVY™ INTAKE SYSTEM:

With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECNOCRAFT E9X ///M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket

*(PLEASE SEE PRICE LIST FOR OPTIONS)*

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: tece92m3ras

Click to Enlarge

-Stage 1 of the ENVY™ intake system is a direct drop-in replacement of the plastic OEM intake bridge on E9X ///M3s. With a more highly effective design versus factory, especially at speed, the ENVY’s RAM Air Scoop ensures that a large volume of air can be force fed into a starved intake system. Also, since the RAM Air Scoop is fabricated in 100% DRY CARBON the goal was to maximally enhance airflow dynamics conforming to the tight space tolerances behind the ///M3 kidney grilles. Rest assured this goal was achieved and the largest RAM Air Scoop in the market for the E9X ///M3s are now readily available.

Tecnocraft introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X ///M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 ///M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your ///M engine bay over time.

With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECNOCRAFT E9X ///M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket

*(PLEASE SEE PRICE LIST FOR OPTIONS

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: tece9m3etc

Click to Enlarge

Stage 2 of the ENVY™ intake system is a direct drop-in replacement of the plastic transition pipe on E9X ///M3s. The main advantages of the ENVY™ Transition Chamber is the smooth delivery of intake charge from the RAM Air Scoop by its elimination of unnecessary notches and choked design points leading into the factory ///M3 airbox. Forced air makes its first contact with an organically designed transition chamber, which allows airflow from the ENVY™ Ram Air scoops to be naturally reservoired and transitioned smoothly from left to right. All unnecessary turbulence was eliminated in the ENVY™ Transition Chamber’s design and conforms to extremely tight tolerances to provide a dramatic volume increase to charged air.

Tecnocraft introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X ///M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 ///M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your ///M engine bay over time.

With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.

The TECNOCRAFT E9X ///M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket

Estimated Product Shipping Weight inc Packaging: 5.00 Kg