CA: Engine Performance (see also forced induction & remapping sections)

Product Code: vcmsdfcl

Click to Enlarge

Preserve your limited slip differential. When your differential's oil temp gets too high, you lose horsepower and risk CDF (Catastrophic Differential Failure). There is only one way to control it, and that is with a Differential Oil Cooler Kit. You can install this kit underneath the car or inside the boot.

This kit is supplied with:

Differential Oil Pump
Mocal Differential Cooler
All Fittings Necessary to Complete Install
10 ft length -10 Aeroquip Hose
Instructions

Some post 2006 applications may require slight alterations to fittings.

Estimated Product Shipping Weight inc Packaging: 6.00 Kg

Product Code: modstat

Click to Enlarge

A genuine BMW Motorsport part.

E46M3 Motorsport Thermostat 55C (Also fits Euro E36 M3 engine).

A Genuine BMW part this thermostat opens at a much lower temperature than stock to keep your S54 engine (or Euro S50/S52 engine) running cooler in race and or tuned / supercharged applications.

Fitting Time: 2.50 hours.
Estimated Product Shipping Weight inc Packaging: 3.00 Kg

Product Code: msdreardiffplug

Click to Enlarge

The Dimple™ super drain plugs that we supply are the strongest high temperature magnetised drain plugs available. These magnets are the cure for your diseased engine and transmission oils because you can now effectively remove those tiny particles of metal in your oil so you can have peace of mind that your engine will last longer, maybe a lot longer. This is great peace of mind and in the long run can’t fail to save your money as well.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: msdsp

Click to Enlarge

Product Code: pwrrad

Click to Enlarge

AS FITTED TO 540 BHP M3
Click to Enlarge

SPECIFICATIONS FOR E46 VERSION
Click to Enlarge

This is CA 's radiator upgrade of choice, as used on our 540 BHP demo E46 M3, 650 bhp E92 M3 and others.

Whether radiators or intercoolers, PWR products are built to the highest standards possible and offer a significant improvement to cooling performance over OEM radiators.

Most are available in choice of 40, 42 and 57 mm cores, both of which fit into the original locations with no or very little modification ( E46 M3 57mm version fits straiight in).

Radiators mostly come polished to near-chrome shine. With 18 fins per inch and 100% TIG welded, PWR radiators are strong and durable. PWR All-Aluminum radiators are made from aircraft quality aluminum, and manufactured 100% in-house. Featuring oven brazed (no epoxy) core, this radiator is a direct replacement for the OEM radiator and eleminates the problem of cracking plastic tanks. Radiator tanks are polished.

Suitable for road and race use.

Please refer to price list link below for applications and pricing then call or email us to order.

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

PWR PRICE AND APPLICATION LIST

Product Code: vracoil

Click to Enlarge

This kit features components made in-house in the USA to our motorsports standards for superior fitment and reliability. These kits have found their way on to all of our VAC racing vehicles and vehicles around the world. Thanks to quality components; they survive for years and years on the track with no issues.

Upgraded and improved constantly since inception to make sure it is the easiest to install and the best functioning product available.

Super high quality A/N fittings and lines, heat exchanger and CNC'ed components combined for a direct replacement/upgrade for your current setup. This systems flexibility allows it to be used by any racer as it can install in any way you wish. The addition of of an in-line thermostat allows street use without a problem.

This kit features a Billet Aluminum Racing Oil Filter Housing made from 6061 T6 aluminum. The two piece design allows direct replacement of factory housing and maintains alternator and power steering in their original locations.

Features:
•Allows easy instal Dry Sump or Acu-sump Kits.
•Provides oil temp, oil pressure, and VANOS line ports.
•Excellent for F/I setups like Turbos or S/Cs that require an oil feed line.
•Supplied with AN fittings and P/S Pump Spacers.
•More than full two pounds lighter than factory housing.
•Allows for easy service of components beneath intake manifold.
•Simplifies plumbing of remote oil cooler in all applications.
•Can be used on the street with the addition of in-line thermostat and filter.

Oil Cooler Sizes:
11 x 11" Cooler (most cooling effect) & 11 x 8" Cooler 11 x 5" Cooler (easiest to install)

NOTE: kit prices may vary slightly dependant on exact model and size of cooler required.

Also available at extra cost for this kit :
-Reusable In-line Racing Oil Filter £128.00
-Add External Thermostat ( for street car use) £155.00

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: voilbar

Click to Enlarge

This Remote Oil Sensor Manifold is designed to facilitate the installation of Oil Pressure or Temp sensor/s.

Originally designed so that the S14 owner can send oil to this manifold, install an aftermarket gauge and still maintain the OEM "emergency oil pressure" dummy light- it had become popular as a quasi-universal item.

Popular on cars that read artificially higher oil temps at the sensor due to the location of the exhaust manifolds or other issues.

•(1) 1/8 NPT Inlet
•(2) Sensor holes: 1/8 NPT + 12x1.5 Metric

This manifold is designed for easy installation with two mounting holes to sheet metal.

Notes:
•Sensors and fittings are sold separately.
•(Due to the fact oil doesn't flow through this type of manifold, Oil temp is not a recommended use for this piece, pressure is ideal).

Estimated Product Shipping Weight inc Packaging: 2.00 Kg

Product Code: vmugoilp

Click to Enlarge

An excellent upgrade for those who race or have a modified / Forced induction engines, this is the best OE style oil pump available anywhere.

Lubrication issues are a common killer of BMW engines. The dual-pickup pump is much better than standard single pickup but this pump is a dramatic improvement over both.

This oil pump starts with an OEM housing (either supplied by you, or as a core from us at extra cost) that is expertly modified to provide higher volume and improved reliability over stock.

Effective lubrication is critical to all high performance engines, especially the high specific output S54 & S50. The S54 especially, with its narrow rod bearings is sensitive to oil starvation and bearing failure. Assuring that your engine will not fail due to a poor lubrication is crucial during all operating conditions.

This pump features two important upgrades:

1) Engineered using the Oil Pump Upgrade reinforcement kit ( as featured elesewhere in this section) integrated in it's design; giving a stronger gear drive mechanism for much lower likelihood of the common pump failures on the track or hard road use.

2) Fitted with custom gear set with a larger sweep area to the pump mechanism, increasing volume by 22%.

Important Notes about this Service:
A good used or new oil pump is required for this conversion service. Therefore there are 3 options:

1 – We send you a new OEM BMW Oil Pump with the high volume converson and oil pump upgrade kit installed., and charge you extra the cost of this new core pump, in addition to the cost quoted on this page for the actual upgrade service.
2 – You send us your OEM BMW S54 or S50B32 Euro Oil Pump ahead of time and we perform the upgrade on your pump
3 – Occasionally we have a stock of good reconditioned S54 pumps that we can perform the service to, which is good if you don’t want to buy a brand new pump, please enquire.

PLEASE CALL US TO DISCUSS YOUR REQUIREMENTS.

LISTED PRICED BASED ON S54 ENGINE.

Estimated Product Shipping Weight inc Packaging: 7.00 Kg