CA: Electronics,Ignition,Gauges etc

Product Code: defigge

DEFI COLOURS
Click to Enlarge

OFF - ON VISUALS
Click to Enlarge

DEFI LINK SYSTEM
Click to Enlarge

Click to Enlarge

DEFI GAUGES & ACCESSORIES
Click to Enlarge

VSD X HEADS - UP DISPLAY
Click to Enlarge

VSD X HEADS - UP DISPLAY SCREEN
Click to Enlarge

Click to Enlarge

BF TACHOMOTER
Click to Enlarge

GAUGE ACCESSORIES
Click to Enlarge

Defi produce some of the world's best and most distinctive gauges and display units.

Listed below are details for their various products with related images on the left of the page.

Please contact us to discuss your requirements.

Full Defi application and price list appears on the link below.

DEFI BF SERIES GAUGES

Defi-Link Meter BFs are electronic blacked out gauges with high response and refined design. When power is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full effect.

Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be so connected and controlled by the one Control Unit II. The name of the connection system is "Defi-Link System", which allows the gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.

Available for most engine functions such as Boost, Oil Temp., Oil Press., Exhaust Gas Temp., Volt, Fuel Press., etc.

Features:
-The illumination color can be chosen from white, amber red, and blue.
-The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ).
-Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled.
-Driving data can be stored and can be replayed up to 3 minutes.
-Double Warning function via meter's LED lamp and a beep
If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light.
-Defi-Link Indicators can be connected to each gauge.
-Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.
-Defi-Link Control Unit II is required to operate Defi-Link Meter BF.

----------------------------------------------------------------------------------------------------

DEFI LINK VSD X HEADS - UP DISPLAY

Defi-Link VSD X unit displays vehicle status information such as speed and engine rpm on the Windscreen (using a special exclusive reflecting plate).
This projection technology is commonly called "Heads Up Display(HUD)." VSD is Defi's original technology focusing on compactness and universality utilizing HUD technology.

By connecting this product to the Defi-Link System, oil temperature, water temperature, oil pressure, fuel pressure, and exhaust temperature can be displayed other than speed and engine speed.

Features:
-High visibility display adopting VSD technology (super high bright VFD).
-Hardy transparent Target Screen
-Auto and manual dimmer modes; when the auto dimmer mode is selected, the brightness of display is adjusted automatically depending on the outside light.
-Two super high bright LED indicators
-Switch panel is illuminated with LEDs to make operation in the dark easy.
-Mounting bracket allows angle adjustment.
-Normally displays speedometer and engine speed. By connecting to the Defi-Link System and sensors (sold separately) various other gauge / engine status information can be displayed.

----------------------------------------------------------------------------------------------------

BF TACHOMETER

BF Tachometer is a stand-alone tachometer which consists of a gauge, a switch unit, and a large warning / shift indicator.*BF Tachometer cannnot be linked to the Defi-Link System.
Like the BF gauge series, this unit has an electronic blacked out face when "off", as soon as the car is turned on, the gauges light up and are in full effect.

Facia diameter is 80mm (3 1/8"). The scale variety is 9000RPM and 11000RPM. The color variety is white, amber red, and blue.

Available in blue, amber and White iluumination.

Features:
-Stepping motor "STS26A"
-Maximum angle of deflective 270 degrees (full sweep) is controlled by the microcomputer up to 4600 division (0.057degrees each) to provide high precision and accuracy of information generated. The stepping motor is of sufficiently quick response for use in all sorts of professional motorsports.
-The scale is compressed to acquire great visibility and ease of use.
-LED illumination
-The gauge dial and the needle pointer performs opening and closing modes interlocked with turning ON/OFF of the ignition.
-5 stages of brightness for the daytime and 6 stages for the nighttime. The brightness can be decreased/increased with the vehicle lights switched on/off.
-Dual warnings; light and buzzer
-Two customer-defined warning RPMs can be set. When the RPMs are exceeded, the warning LED blinks/lights up and the warning buzzer sounds.
-Exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in addition to the warning LED in the gauge.
-Peak memory function
-Large-sized detachable switch unit.
-By having the Defi rev adapter built-in, this tachometer works even on vehicles with DIS (Distributor-less Ignition System) which engine speed signals cannot be picked up due to connection vehicle control units with serial communication.
-Regular Position Bezel for 80mm (3 1/8") gauge is included in the product.

Estimated Installation Cost at CA Workshops: £1.00 inc. VAT

DEFI GAUGE PRICE & OPTIONS LIST