CA: Transmission & Driveline

Product Code: aae46dieselssk

Click to Enlarge

The Active Autowerke S1 E46 320d/330d Short shifter kit creates up to a 30% shorter throw than stock. The kit features a completely self-contained and self-adjusting primary pivot bearing assembly that retains lubrication, keeping out that grit that 'roughens' a shifter feel over time, and positions the shifter assembly perfectly for ideal linkage alignment. The S1 shifter is also built with a new full-length internal vibration absorbing absorbing material that surpasses any OE or aftermarket material for longevity and retention of design specifications.

Installation of the unit is a direct replacement of the factory unit and does not require any cutting. The upper section is alloy steel, acoustically isolated from the lower section. For custom-tailored ergonomic, the height adjustable design reaises or lowers top section. This allows changes from original height to as much as 3/4" lower. The single piece T-304 stainless steel lever is the strongest shifter available with an integral pivot ball. All shifters in the S1 Series are compatible with Original BMW shift knobs including illuminated knobs.

Precise engineering resulted in a less notchy feel during shifts when compared to the factory system.

Features include:

• Upper section is allow steel, acoustically isolated from the lower section
• Locking Collar for Height Adjustment
• Shifter creates up to 30% shorter throw
• Ability to raise or lower top section for ergonomic purposes
• Single piece T-304 stainless steel lever is the strongest available
• Lower pivot bearing setup virtually eliminates friction

*(This listing is for E46 320d and 330d models only)*

*(PLEASE PROVIDE YOUR LAST 7 DIGITS OF YOUR CHASSIS NUMBER WHEN ORDERING)*

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: acsukp-30

Click to Enlarge

We can now offer Genuine AC SCHNITZER parts.

We have been appointed OFFICIAL UK DEALERS by AC SCHNITZER UK.

We offer all products from all the ranges including: styling / chassis / wheels etc…

Please call for prices

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Click to Enlarge

The best short shift kits on the market ....

* This listing is for E36 328 and M3 5-Speed only, please see Variations for other models.

Features that set the Rogue Shifter apart from others include:

CNC Construction
CNC machined 303 stainless steel upper, adding approximately 100 grams more to the top of the shifter lever, thus improving shifter feel.
Shifter lever lower portion is also CNC machined from 303 stainless steel.

Pivot Ball and Pivot Bushing
These are made from Ertalyte TX thermoplastic material. This superior material maintains the vibration dampening qualities and built in lubricity of the factory pivot, but adds superior heat and wear resistance. Its coefficient of friction is 420% better than a stainless steel pivot ball. Depsite its hardwearing properties, we have made this pivot ball repleaceable for possible future maintenance.
Rogue shortshifter Levers also use superior bonding materials for the composite pivot ball and bushes (bonded in a similar manner to original BMW fitment) to achieve a shorter, more positive shift throw without sacrificing the vibration dampening that was built in by BMW.

Weighted Selector Rod (WSR)
Simply shortening the shift lever or moving the pivot point will not produce the optimal shift feel. The smooth action that sets Rogue kits apart comes from the unique weighted selector rod. This replaces the factory selector rod with a higher quality version that has significantly greater mass. This counteracts the additional leverage effort normally required with shorter levers so as to pretty much match the factory "lightness of shift", thus doing away with the requirement for a heavier shift knob as often used by inferior shift kits in an attempt to lessen the shift effort.

Included with the Rogue Shortshifter are:

Short shift lever.
Weighted selector rod (not all models).
Shifter carrier with pivot relocation adapter (not all models).
Delrin carrier bushings (not all models).
Shifter removal tool.
Factory replacement washers, clips and grease.
Factory replacement carrier pin (not all models).
Fully detailed installation instructions.

* This listing is for E36 328 and M3 5-Speed only, please see variations for other models.

Fitting Time: 3.00 hours.
Estimated Installation Cost at CA Workshops: £180.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 3.00 Kg

Product Code: uucsskdssrs

Click to Enlarge

What makes the UUC Motorwerks short shifter kit so good is the engineering and attention to fine details, many different points that add up to tremendous differences in how the unit works and feels.

We use our own precision-machined pieces, all "massive overkill" designs, race-tested to ensure they easily surpass the rigors of street use.

Upper lever section is height-adjustable for driver comfort and personalized ergonomics. Simply loosen, slide lever to preferred height, and re-tighten.

CNC-machined stainless steel lower section features integral pivot ball and self-adjusting primary pivot bearing. No welds, no plastic.

Special features that make the "Ultimate Short Shifter" unique:

- 100% CNC-machined 303 stainless steel construction.
- UUC's "massive overkill" design philosophy exemplified. The precision machining of these shifters makes them feel like a solid one-piece design that still absorbs vibration via the rubber inner section. They do not come apart or flex like "clip together" shifters.
- Height-adjustable design.

Add the DSSR (Double Shear Selector Rod) linkage system for even more precision. It's a permanent repair for the slop and free play that develops in the wear-prone plastic selector joint of the transmission.

NOTE: EVO3 shifters include cartriadge bearings and delrin carrier bushings standard.

(PLEASE CALL OR EMAIL US TO DISCUSS YOUR REQUIRMENTS)

Estimated Product Shipping Weight inc Packaging: 1.00 Kg